OpenPilot CC3D Flight Controller STM32 32-bit Flexiport

OpenPilot CC3D Flight Controller STM32 32-bit Flexiport

0 (0 reviews)
SKU: 1990 (Added on 03/04/2015)
Stock: 20
Weight: 180 g


OpenPilot is a next-generation Open Source UAV autopilot. It is a highly capable platform for multi-rotor craft, helicopters, as well as fixed wing aircraft. It has been designed from the ground up by a community of passionate developers from around the globe, with its core design principals being quality, safety, and ease of use. Simplicity does not come with any compromises either: with no hard-coded settings, a complete flight plan scripting language and other powerful features, OpenPilot is an extremely capable UAV autopilot platform.

More details please refer to

Straight Pin as below:

OpenPilot CC3D Flight Controller Staight Pin STM32 32-bit Flexiport

Bent Pin as below:



OpenPilot CC3D Flight Controller STM32 32-bit Processor for RC Models

CC3D CopterControl hardware has the following features: 

•Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM
•3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer
•Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.
•Software support for Windows, Mac and Linux
•Direct high speed USB support with no drivers required, a truly plug and play device.
•Spektrum satellite receiver support
•Futaba S-BUS hardware support
•Innovative Flexi-port technology for superior port flexibility
•4Mbits on-board EEPROM for configuration storage

Flexiport : 

CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs.

Superior user experience : 

We have tried to make your experience with OpenPilot as easy and trouble-free as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed. A standard mini-USB cable is used to load the latest firmware and configure everything for your unique airframe.
The OpenPilot project, whist still young, it trying to make Open Source much more user friendly. OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it!

Everything you need : 

You won’t need to buy add-on boards or extra chip programmers. While it may be common practice among other projects to nickel and dime for extra parts or sell unfinished hardware to make a profit, the OpenPilot project simply believes in providing superior hardware at the lowest possible cost.
Don’t be fooled by the price. CopterControl provides comparable functionality to other high-end autopilots at a small fraction of the cost. Commercial projects will charge what they can get away with, regardless of quality or features. The non-profit OpenPilot project is different. Consider getting involved and helping us progress.

Sensors and Components: 

3-axis Gyroscope array and 3-axis Accelerometer: MPU-6000
Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers.
Simultaneous support for multiple receivers.
ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels
MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites
FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development)
10 PWM outputs to servos or ESC’s, or for camera stabilization
Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers.
Onboard USB connectivity for easy configuration.
USB and serial telemetry and configuration 
Supported by powerful OpenPilot GCS
4 Mbit onboard memory
3C Quaternion based complementary filter running at 500Hz


•1 * CC3D Flight Controller
•1 * 8p wire rod
•2 * 4p expansion path


All packages are sent without our website logo or any information indicating about us.

Customers Who Viewed This Item Also Viewed

Prev Next

Customer Reviews

Average Customer Review (0 customer reviews)
  • 5 star: 0 (0%)
  • 4 star: 0 (0%)
  • 3 star: 0 (0%)
  • 2 star: 0 (0%)
  • 1 star: 0 (0%)

Share your thoughts with others

showing latest 5 entries. Click here to read all reviews.


  • All FPV products
  • Extremely low prices
  • Timely refunds and replacements
  • Worldwide free shipping

Get great weekly deals and offers