Flycolor Raptor S 4 In 1 BLHeli-S 30A ESC DShot Integrated OSD with F3 Flight Controller

Built-in OSD Version 

● EFM8BB21F16G MCU with 50 MHz maximum operating frequency. using dedicated 3in1 drivers, makes
the start more smooth. ESC maximum speed is limited to 500k eRPM.

● small size&lighter in weight. More suitable for ultra small multirotors.

● Two layers tower structure between 4in1 ESC and FC using quick pin connection. makes the installation
faster and more convenient

● Exposed pads for Battery and Motor wires, fast welding without additional disassembly, motor replacement
is more convenient .

● F3 flight controller, supports PPM and SBUS remote control / receiving mode.

● FC integrated OSD, no external OSD device is required, integrated 5V/1A for Image transmitter, camera,
buzzer, LED and other peripheral devices ;

● BLHeli-S firmware designed for superior performance in multirotors, and uses hardware generated motor
pwm for smooth throttle response and silent operation.

● There are tuneable parameters that can make the code run well even in the most demanding situations,
although default settings will work excellently in normal operating environments.

● The code supports regular 1-2ms pulse width input, as well as Oneshot125 , Oneshot42 and Multishot . The input signal is automatically detected
by the ESC upon power up.

● Supports Dshot digital signal, anti-interference ability is stronger, and do not need throttle calibration. 

No OSD version

● EFM8BB21F16G MCU with 50 MHz maximum operating frequency. using
dedicated 3in1 drivers, makes the start more smooth. ESC maximum speed is limited to 500k eRPM.

● small size&lighter in weight. More suitable for ultra small multirotors.

● Two layers tower structure between 4in1 ESC and FC using quick pin connection. makes the installation
faster and more convenient

● Exposed pads for Battery and Motor wires, fast welding without additional disassembly, motor replacement
is more convenient .

● F3 flight controller, supports PPM and SBUS remote control / receiving mode.

● FC integrated 5V/1A for Image transmitter, camera, buzzer, LED and other peripheral devices ;

● BLHeli-S firmware designed for superior performance in multirotors, and uses hardware generated motor
pwm for smooth throttle response and silent operation.

● There are tuneable parameters that can make the code run well even in the most demanding situations,
although default settings will work excellently in normal operating environments.

● The code supports regular 1-2ms pulse width input, as well as Oneshot125 , Oneshot42 and Multishot . The input signal is automatically detected
by the ESC upon power up.

● Supports Dshot150, Dshot300 and Dshot600.Dshot is digital signal, anti-interference ability is stronger, and do not need throttle calibration.